Why You Need a Board Certified Plastic Surgeon

Having a cosmetic surgery procedure is a very important, life-changing decision. Depending upon what you want to change—and why—are factors in determining where you should have your surgery and with whom. It’s easy to get caught up in the first presentation you see from a charismatic plastic surgeon, but your decision to go under the knife should be based on facts, not fanfare. Finding a reputable, board certified plastic surgeon is the place to start.

plastic surgery

There are those fortunate people who can afford to fly wherever they need to have their surgery, but that is not the majority of us. While the top doctor may be in New York or Chicago, if you are in Oklahoma, getting to that doctor might be a challenge. There are, however, thousands of qualified plastic surgeons all across the United States; doing your homework is the first step to finding one.

You can enlist the help of friends and family, if you are willing to share your surgery plans with them. A solid recommendation from someone you trust is a good jumping off point; you can see the work up close and personal. Plus, your loved one can give you tips on what to anticipate with this particular doctor. Find out if this doctor specializes in the type of surgery you would like to have; if you want a nose job and your doctor specializes in breast augmentation, it might not be the best pairing. Also, conduct a thorough investigation online. See if the doctor has a good following, and confirm that he or she is board certified. Being board certified in plastic surgery is the key; a doctor can be a board certified ear, nose and throat doctor for all you know! Being a board certified plastic surgeon means this doctor is accredited by the American Board of Plastic Surgery, the only recognized board for plastic surgery! In addition to an oral and written examination, doctors are required to have six years of surgical training, three of which has to be in plastic surgery. Doctors can claim to be “plastic surgeons” even if they do not pass the training, so make sure your doctor has the credentials to back up his or her claims.

Online, you can investigate a doctor’s standing and certifications at ABPlasticSurgery.org. Once you have solidified his or her qualifications, you can schedule an appointment. Make sure to bring a list of questions prepared in advance and insist on seeing some before and after photographs of previous patients. You will want to ask about any hospital or clinic affiliations, since board certified plastic surgeons must operate only in accredited facilities. They are also required to maintain continuing education to kept apprised of the newest advancements in their particular field, so these are good questions to ask. Additionally, a doctor’s education and background might be topics of discussion. You will want to be assured that your doctor has the necessary training in the particular surgery you would like to have. While it is not necessary for the doctor to have graduated from a big named college, it can’t hurt. Remember, currently anyone with a medical degree can perform plastic surgery, but you will want a qualified specialist to perform yours.

A few other issues to consider: how is your rapport with your doctor? You will want to feel extremely comfortable asking questions of your doctor and feel like he or she is not rushing you or making you feel like a number. Electing to have plastic surgery is a very personal choice; you want to have a doctor who understands and is supportive of your goals. You will also want to make sure that your doctor has had successful results performing the plastic surgery you desire. A “personal touch” and ample communication can go a long way. While there are never any guarantees that you will achieve the results you desire, you can at least gauge whether or not your doctor has had previous success.

You may have heard stories about famous people who have had several plastic surgeries in the same day, even when the surgeries seem unnecessary and egregious. You may wonder – why did this doctor agree to complete multiple surgeries? More often, the answer is money, and possibly prestige. The doctor may want to add a celebrity to his or her list of clients to help entice others into their offices. You want to make sure that a doctor is going to be honest with you, not just take your money. If a doctor feels like you would not benefit from a particular surgery or you are not a candidate for some reason, it is better to know than have a procedure that does not meet your satisfaction. Opt for a doctor who has minimalist views; you don’t want to emerge from your surgery looking “overdone”. Be open to your doctor’s observations and suggestions because you may believe you need a particular procedure; your doctor’s experience may dictate a more appropriate surgery or even a non-invasive procedure.

Once you have found your board certified plastic surgeons in OKC and you have figured out the procedure you want, your desired outcome and even figured out the financing, remember to have realistic expectations. Plastic surgery will not solve your problems and you will not emerge looking like a movie star: you will look like an enhanced version of yourself. It is important to discuss the reasons you want the surgery with your doctor and to be honest. There are people who are not viable candidates for surgery based on their expectations or due to health concerns. Tell your doctor everything; not disclosing a medication or an ailment could potentially put you in harm’s way. Make sure to ask about any possible side effects or hazards associated with your procedure so you can assess the risks involved.

The American Board of Plastic Surgery can help to answer any general questions you may have and may even better prepare you for your initial meeting with your doctor. With the proper research and preparation, your plastic surgery can be a major success!

Quality Marijuana Seeds

Marijuana has always been big business, but with the legalization of marijuana in several states and the use of medicinal pot on the rise, it is now a bigger business than ever before. Now that pot has lost a lot of its stigma in various states, many choose to grow their own marijuana at home for personal use. If you live in a state where marijuana is legalized and you decide to grow your own, where can you get seeds and how can you be sure that the seeds you obtain are quality?

Growing your own is an economical way to ensure that your marijuana is to your liking, since there are so many different strains. However, if you are a novice grower, you can run into problems, and it might discourage you into giving up. It could be as simple as finding the most suitable seeds and learning how they grow, in which soils and at which rate. Some seed strains are more resilient than others, others produce better yields than others and there are others that grow quickly. There are many different types of strains available but you want to be sure to pick one that can grow in the climate in which you live.  Research the characteristics of the particular strain and the amount of time you will need to grow the plant. Finding what suits your needs might be the difference in the type you chose to grow and its success rate.

There are four main qualities to look for when selecting marijuana seeds: you will want something that grows quickly, is easy to cultivate, produces large crop amounts and produces high potency cannabis. While you may not be able to locate seeds that provide all these qualities, you will want to investigate what factors are most important to you as a grower. Starting with healthy, viable marijuana seeds is the first place to start.

The first factor, having a kind that grows quickly, will help to reduce the amount of time you will have to devote to its care, which also means you will have the marijuana buds sooner. If you are impatient and just want to get to results, finding a lower quality seed that grows quickly might be just what you need to get started. Once you have experience producing a few batches of quickly grown weed, you may want to move up to a better quality that may take more time to cultivate.

The genetics of the marijuana seeds will determine its ease of cultivation. The better the quality, the easier to tend, and generally, the better the product. The biggest problem with getting the highest grade grass tends to be that since it is not legal in all the states, there is not proper regulation, making it difficult to know if you are buying good seeds. You can’t tell anything about their genetics just by looking at them, which is why buying seeds online from a reputable seed bank is generally the easiest way to obtain them, unless you know a knowledgeable local grower willing to sell you some seeds. A seed bank may also offer some troubleshooting advice to help you grow your plant, while a local grower may not. The seed dealer wants you to be successful; if you are, you are more likely to buy their seeds again. Oftentimes, commercial growers will freeze the seeds, especially growers from colder climates. You won’t be able to tell if the seeds you have received have been frozen, but the likelihood that they will produce healthy plants is greatly reduced. Also, if you purchase seeds that are damaged, are immature or have suffered extreme weather factors, like being frozen, they are less likely to sprout. Old seeds are not particularly productive, either. If you do receive favorable seeds, you can anticipate that every one out of three seeds will actually bear plants. How can you determine if the ones you have invested in are worth their buds in the long run? Look for seeds that are hard and dark brown, or marbled with lighter shades because these are the most mature seeds. Fat, large seeds with a rounded shape are also best for planting. Immature seeds will be smaller and may be light green or white. The younger seeds are protected by an outer barrier that dies and falls off as the seed matures, but you can gently remove this cover. Recognize that once you have started the growing process, it is a time investment. You may not get a viable batch the first time, so you may have to suffer through some trial and error to get it right. Once you have some experience with various strains and several years of successful batches, you may decide to grow both male and female plants. The male plants yield the most seeds; the unfertilized female plants garner the biggest and best crops. If you accidentally mix the two, your product will be a lot smaller and contain a lot of seeds. While this make work for your next batch of plants, it is a complicated process. Novice growers should buy unfertilized feminine seeds to simplify the process. You will, however, only produce feminine plants, and they will yield very few seeds. It makes it much more difficult to duplicate a strain of marijuana, unless you can purchase the same seeds from the same seed bank.

Make sure you store your seeds properly to ensure they germinate. You will want to store them in a cool, dry, dark spot with some rice or silica gel to absorb the moisture. They need to be stored in an air tight container; this will ensure the longevity of the seeds’ growth period. If they are not stored properly, they could become compromised and lose their growth potential.

With any major undertaking, it is imperative to do your research first. The legality issue should be addressed first; growing pot is not legal in many states and in not advised. Once you have determined you are able to grow marijuana seeds in Colorado, you will want to know how many plants you can legally cultivate. Where to grow them and how to maintain them are also key factors but most importantly, you need to know what you want and then to investigate the many strains of marijuana to see what suits your needs. It all starts with the seeds, of course. If you are growing your own, the seeds will make all the difference, so ensure the seed bank from which you make your purchase is a reputable one. Be patient; it may take a few tries to get the perfect pot.

New Industrial Revolution Beckons

A  new industrial revolution could transform traditional manufacturing, says Dr Julie Madigan, Chief Executive of The Manufacturing Institute.

“A  ‘quiet revolution’  involving a move towards ’boutique manufacturing’  is taking place in the UK”, explained  Madigan.  “Manufacturing specialists working in factories no longer have a monopoly on production. Technological developments are empowering people of all ages and from all walks of life to design and make things. ”

The Manufacturing Institute launched the UK’s first Fab Lab (digital fabrication laboratory – dog hospital okc) in Manchester,  in 2010. The concept has blossomed and the Manufacturing Institute is leading the roll-out of Fab Labs across the UK.

“This is  unlocking the ability of ‘garden shed tinkerers’  to move forward and to design and develop sophisticated products”, said Madigan.

Fab Labs promote grassroots innovation – providing an opportunity for almost anyone to design and  make almost anything . There’s a wealth of manufacturing expertise available as well as a wide variety of digital and practical equipment – including 3D printers, laser and vinyl cutters and milling machinery.

Madigan added “By making what we need locally – with minimum or no waste – a new model of ’boutique manufacturing’ is emerging.  It’s helped on the way by a new generation of IT literate people who aren’t afraid of having a go at making things for themselves. At a time when there’s broad consensus that the British economy needs to be rebalanced in favour of manufacturing, this revolution and extension of the boundaries of traditional manufacturing couldn’t be taking place at a better time.”

Members of the public have free use of the Fab Lab during open sessions, but the facilities are also aimed at  businesses and entrepreneurs – for the production of  product prototypes and  testing  out ideas. While public users are expected to share their inventions with the global Fab Lab network, businesses can develop  innovations in private and at low cost.

Further information:  www.fablabmanchester.org

Social media and Business – Question marks and Twitter

Like many working in the ever advancing worlds of marketing, communications and PR, I find myself too trying to guide myself and clients through a digital world that once didn’t exist. For myself the world of social media began with Myspace and although resistant, in 2010 I took a position which required me to have a personal Facebook page – to use my social network to promote the business. I wasn’t exactly thrilled at the time- yet a year later I would be managing that locations Facebook. Now, I not only use all of these social networks for myself and the company I work for – I also use the behemoth of social media – Twitter. If you, like many, are still struggling to wrap your mind around what Twitter has to offer – you aren’t alone. Like my resistance to Facebook, many businesses have yet to understand the potential of Twitter – and I seem to find – that which we don’t understand – we resist. So here is some simple guidance to kick start or refresh your approach to utilising Twitter as a tool for your business – one step at a time.

To start, let’s outline some simple goals….

1. Build a network

2. Be seen

3. Interact

4. Generate interest

5. Gain leads

6. Supplement already established relationships

7. Increase media publicity

8. Increase SEO

Now that we know our goals – we need to know what is relevant to our business and how this applies to our start on Twitter.

1. Know your market– develop a list of all of your current clients and stakeholders – find them and follow. Feel free to say hello to them when you first follow.

(You want them to follow you back.)

2. The power of the hashtag – Create a list of relevant keywords and hashtags for your business. Hashtags are a simply way to make sure your content is available to users looking to find information on a specific topic. Hashtags can be placed anywhere in a tweet ? at the beginning, middle, or end. They can be used as part of the sentence. Words which are hashtags can become popular and a part of a trending topic. When a hashtag is clicked on, all posts which feature this hashtag will be brought up.

3. Keep it simple, relevant and trending – Two or three hashtags is plenty. Use hashtags that are relevant to a post and use a hashtag that tends to trend.

4. One other thing on popularity – All hashtags started somewhere. People will say that using hashtags that are most popular is the best way to go. However, if you want to create a hashtag – my advice is to own it – and go for it – especially if you believe it will become a relevant keyword to your business in the future – and you will have a jump on it should it become the next big thing.

5. Follow – Look at who your clients/competition are following – anyone in your sector and relevant to your business that you should be aware of? Potential clients? Partners? Peer group organisations?

-Follow them- Observe who they are following. Build a network.

4. Top 10 – This can be a monthly goal. Create a list of the top 10 businesses you really desire to work with. Follow them. (Keep the expectation reasonable but feel free to expand this number to more depending on the scale of your resources.)

Use this as information gathering for your sales team. Is anything you are seeing relevant to your business? Can you supply? Can you advise? Are you working on something that pertains to their business? If see something relevant – comment or retweet. This catches attention and builds your credibility – you show interest and a potential for access to knowledge or skills for them. 

Then look for the angle that would support a conversation (phone call or meeting) between your business and theirs.

Shout out:

Do remember that all businesses appreciate a good word and a bit of promotion – when a client/supplier/lead does something well with you – or you have a fun meeting etc. create a tweet:

‘Fun times [Insert activity] at the #company headquarters.’ #businessactivity (ex: metalpressing) #industry or #location and #theircompany

With clients: Once you have begun following them, it is time to interact. When they post an article – comment. When they share interesting news in relation to your industry – retweet. It’s a quick and easy to show you support them – but also to increase your potential of being seen. Include their twitter handle or hashtag.

6. Don’t forget your friends! – Give credit where credit is do. Include relevant businesses within your own news.

Include @twitterhandle for businesses involved in a post or include their hashtag #businessname if they tend to use that. 

On twitter you will find publications, editors and journalists themselves. Following a publication keeps you current on what that publication has been covering as of late. Following an individual can give you window in which to what their interests are and who might be best to send your press release or article to.

Twitter and the media

Journalists are people too! And they like a bit of attention – don’t we all? Relationships can be nurtured on twitter.

1. List – Make a list of your top 5 publications. You can add more – depending on the resources – time – you have.

2. Follow – Follow both the publication and the editor(s) or journalist(s) that is your point of contact (typically receives your news) at a certain publication.

This gives you insight to the publication easily and can supply you information to use for later.

3. Interact – A week or so before you intend to send a press release: Leave a comment on one of the editor or journalists posts – and consider a retweet. This gets your name or company name to their attention – if even for a moment and a retweet shows a willingness to share their work which is relevant to your network. The age-old – repetition builds reputation.

4. Send em’ the good news – It’s been week a week or a few days, it’s time to send the press release and you have already taken a look at what the publication or journalist has been posting. So feel free to make a note and compliment a piece of work.

Also, feel free to make a note as to how your news relates to what they have been writing about – or how you feel this fits into their interest.

And do mention your comment or retweet of the previous post – and how you enjoyed it.

5. Keep it short and sweet – journalists receive hundred of messages a day.

(TIP: Have the email title of your press release be interesting…exciting…all of this is only good if you get them to open the message!)

6. Don’t forget your media friends! – Retweet if they post something relevant to you.

Include @publicationaccont or @editoraccount in the post or include their hashtag #publicationname if they tend to use that. This shares their work with your network and shows yours that you were published.

Remember, have fun – keep it fresh: Social media is a less formal platform. So show your personality and remember a little humour and photos are always great ways to keep it light and get your message across.


-People love quotes (yes- use your own!), fun facts, trivia, and ‘can you spot’ photos. These are great for retweets.

-Feel free to also ask questions.

Tweet questions you would like answered – OR – tweet common questions you are asked in your business and let your followers know that the answer to that question is one your website and include a direct link.

For more tips and tricks or help with your companies PR – get in touch with Mel at Melissa@pressvinepro.com

CDM Regulations – what next?

A major  overhaul of the CDM regulations is anticipated in  2014, but it is unlikely that it will come into force before April 2015, says health and safety compliance expert Altius Vendor Assessment. 

The HSE are planning to hold a three month industry consultation period in 2014, with the following changes expected to be included.

  • – Removal of the CDM Co-ordinator role and bringing the functions into the designer’s remit through a Principal Designer.
  • – Removal of the Approved Code of Practice (L144) and replacing it with a suite of guidance notes.
  • – Removal of the explicit compliance requirements — currently in Appendix 4 of the ACoP.
  • – Removal of the domestic client exemption: a default position would be created whereby duties that would fall onto a domestic client would instead fall to the designer or contractor.

The changes are aimed at simplifying the supporting guidance to make the CDM Regulations easier to understand and easier to comply with.  The intention is to improve standards of worker protection, while improving accessibility for small sites.

The Altius CDM Comply online assessment, priced at £110 for all sizes of company, provides contractors, principal contractors, designers and CDM Coordinators with a CDM 2007 Core Criteria Stage 1 assessment that is SSIP approved.

Combined heat & power – no longer energy ‘cinderella’

The latest UK energy statistics show that combined heat and power (CHP),  which is sometimes overlooked as the ‘Cinderella’ of UK energy generation, is rightfully taking its place at the energy generation ‘ball’.

The Digest of UK Energy Statistics (DUKES)  released by the Department for Energy and Climate Change (DECC)  reveal that between 2011 and 2012
CHP capacity grew by almost 3% to 6.1GW, meeting 6.4% of the UK’s total
electricity needs. The proportion of renewable CHP increased almost 20% in 12
months, now accounting for over 8% of total fuel used in the CHP sector.

CHP efficiency benefits led to over 15 million tonnes of CO2 savings, equivalent to removing 5 million cars from the road and representing an increase of 2 million tonnes over the previous year.

“It’s good to see increasing CHP capacity, said Ian Hopkins, Sales Director for ENER-G Combined Power Ltd. “Combined heat and power is around twice as efficient as conventional power generation and delivers the cost and carbon savings businesses are desperately seeking. It also provides off-grid resilience in the event of power failure, yet is sometimes overlooked in favour of more glamorous technology newcomers.

“The UK needs a balanced mix of energy generation, but the enormous benefits of cogeneration are still under exploited. Every day, organisations bemoan
spiralling energy costs and carbon taxes and CHP can provide the simple and
affordable answer to these problems.” 

CHP provides the simultaneous generation of electricity and useful heat and is typically 85% efficient  for on-site energy consumption. It achieves cost savings of up to 40% over electricity sourced from the grid and heat generated by on-site boilers. Systems powered by natural gas or other fossil fuels will  reduce carbon emissions by approximately 20%, while the carbon reduction benefits are even better for those systems primed by renewable fuels.

Cogeneration  can be implemented in new building, when redeveloping an existing site or when replacing ageing boiler plant. It is particularly suitable for customers with sufficient heat or cooling demand, particularly if that demand is for extended periods. As such, it can pay dividends in leisure, manufacturing, hospital, education, retail and many other environments.

There are many legislative advantages to installing cogeneration, which helps with Part L compliance and can mitigate carbon taxation under the CRC Energy Efficiency Scheme and Climate Change Levy. It is also eligible for Enhanced Capital Allowances.

Typical payback on CHP  is between 3 and 5 years, with most systems
having a . product lifecycle of 10-15 years. Additionally, some suppliers offer
energy performance contracts, such as ENER-G’s Discount Energy Purchase Scheme, which means
businesses can benefit from an instant payback with no capital outlay. As such,
clients benefit from an immediate reduction in their energy costs and carbon footprint. The CHP system is then paid for via a metered energy charge that is guaranteed to be lower than previous electricity purchase costs. The plentiful supply of heating/cooling is supplied free.

Commenting on the energy statistics, Dr Tim Rotheray, Director of the Combined Heat and Power Association (CHPA) said: “It is astonishing that in the UK, power stations waste more energy from their cooling towers than the total demand for gas for heating in the UK. Each new CHP site represents less energy waste, better UK competitiveness and reduced demand for imported fuels. With a Government commitment to a new gas CHP policy, the CHP
sector is poised for even more substantial growth, making the UK energy system less wasteful and more cost effective.”

ENER-G are Europe’s leading provider of packaged cogeneration and trigeneration systems. The UK company designs, manufactures, finances, operates and maintains CHP units across Europe. Its systems are available from 4kWe to 10 MWe in size and can be deployed across the commercial, industrial and public sectors.

Further information: www.energ.co.uk/chp

Has ‘death knell’ sounded for punitive business energy contracts?

Mark Alston, General Manager of Warwickshire-based energy purchasing consultancy ENER-G Procurement welcomes the decision by
British Gas to stop business energy contract ‘rollovers’, which result in
companies paying more.

“Rollover” contracts have become a source of excess profits for suppliers over the years and  as such there is no place for them in our mature energy supply market. The term ‘rollover’ implies a soft landing, yet the reality is that organisations which fail to meet deadlines to renew or switch energy contracts are automatically ‘rolled over’  into uncompetitive auto-renewal prices or even to extortionate ‘out of contract’ rates. This is often made worse by a lack of transparency and short timescales involved in the termination process.

“ENER-G has been campaigning for this automatic renewal process on
business energy contracts to be removed. We believe customers should be free to choose whether to enter into a term agreement, or simply pay a variable tariff
which is reflective of the actual costs of supply incurred, plus a fair margin
for the supplier.  We are hopeful that other suppliers will follow the leadership of British Gas and put an end to ‘rollovers’, but we also urge energy regulator Ofgem to properly scrutinise the alternative rates that suppliers will put in place for out-of-contract meters.

“As a practical step in ensuring businesses don’t fall victim to out of contract
default rates, ENER-G has  introduced a free Renewal Reminder Service to alert companies  to the need to renew well in advance of their contract end date. Those using the service are automatically notified in advance of their contract renewal deadline, providing ample time to renew with their incumbent supplier,
or give notice, research the market, compare deals and find the most
competitive new contract.

“ENER-G is also working to achieve greater transparency among suppliers for their third party charges. These can amount to up to 50% of an energy bill, yet are not always firm within many suppliers’  “fixed price” offerings. As such, customers can be unaware that up to 50% of their budgeted cost is liable to increase.  The company is pressing suppliers to categorise their offers for greater transparency and to produce 100% genuine fixed offerings for
clients’ peace of mind.”

ENER-G Procurement is a major broker of gas and electricity contracts to the full
range of business users, delivers energy services to Chambers of Commerce
members across England under the Chamber Utilities™ brand, and is the preferred supplier of energy purchasing and consultancy services to EEF, the UK manufacturers’ organisation.

The energy purchasing consultancy is a founding member of the Utilities
Intermediaries Association (UIA), which was established to improve standards
and enhance the reputation of third party intermediaries in the energy sector.
ENER-G Procurement is also represented on the Ofgem Third Party Intermediary (TPI) working group.  This has been set up to address key concerns raised in the recent Ofgem Retail Market Review (and to work towards recommending an industry-wide Code of Practice for TPIs.

Further information: www.energ.co.uk/procurement

New Employment Legislations May Prevent Job Growth

1STOctober 2013 will see the increase in minimum wage for all hourly workers in the UK. As a result of the devastating impact of the recession, unemployment hit an all time high in 2011 andcontinues to maintain those figures to this day.  A glimmer of hope to many is seen through the government’s decision to increase the hourly rate, yet with SME’s still recovering from the blow of the current financial climate, businesses are worried as to how this decision will affect their companies on a daily basis.

 An increase in employer’s wages ultimately means a sacrifice elsewhere. SME’s can only sit and wait to see how this new regime will affect the stability of their companies. Adjustments will have to be implemented which could result in a cut-back in employee work hours. The irony is evident; as an employee, how do you reap the benefits in an increase in wages, when there are no hours to work? Not only could there be a huge reduction in hours, but some businesses could retract new staffing altogether, adding to the unemployment figures further.

Additional adjustments would have to be applied to avoid financial insecurity within companies. In order to balance the financial output, they would have to gain more through their income; therefore businesses would have no other choice but to reduce employee benefits and charge higher prices to restore the equilibrium.

 Jason Connon, Managing Director form Cushillo Personnel commented “ Our own industry has seen a raft of new legislations introduced over recent months, from the introduction of AWR regulations, RTI payroll, pension reforms and now the pending increase in the cost of employing staff.

All these add additional costs to business and could have a potential impact on our UK flexible temporary labour market. The recruitment industry currently generates a turnover in excess of £19.7 billion and places 1 million people into temporary jobs each week in every sector of the labour market, as well as a significant number of permanent placements.

In my opinion, it is critical The UK must maintain a flexible workforce and the advantages it creates for businesses, individuals and the wider economy.  Imposing overly burdensome regulations on businesses remains a real concern for our clients and how they will cope with the new responsibilities in the current climate of fragile economic recovery.

Whilst all good recruiters want to see workers paid fairly for the importantcontribution they make. The increased administration and tracking required by the recent AWR and Pension regulations presentsthe most significant challenge our industry has ever faced.

This is another challenging area of regulations which will create new costs for recruiters and employers, especially since for the purposes of these reforms; recruiters are considered ‘employers’.

This swathe of regulation and the complexities it creates with regards to workers who change roles frequently must not be underestimated. The pressure on margins and the administration of enrolling and then un-enrolling workers, will be another significant cost to employing temporary staff.

It is important we foster modern work place practices and offer valuable flexibility to workers, ultimately, the UK workforce can only develop if businesses have the freedom to grow and create jobs, and so the impact of any new regulations must be carefully weighed up.

While the pressures of inflation are affecting many people, including the lowest-paid, the scale of recent legislation and pay rises, adds significantly to business costs, most of all by contributing to overall employment costs for employers.

The fear is, it will make some employers less inclined to hire additional members of staff. Put simply, it could lead to more people out of work, as employers will have no choice but to take on fewer staff to do the same work.

Going green helps keep finances in the black

Austerity is good for business at energy management and clean technology business  ENER-G

At a time when businesses are hanging onto the pennies and reluctant to borrow, ENER-G is providing cash strapped organisations with free energy saving technologies – paid for via tomorrow’s energy savings.

 This is a win-win business model says Derek Duffill, Group Managing Director of ENER-G group. He explains: “We fund energy saving technologies, such as combined heat and power, energy saving controls, lighting and biogas generation equipment, off our own balance sheet. In return, our customers refund the investment through the money they save over an agreed contract period.”

This innovative funding model has enabled ENER-G to  grow into a £120 million multi-national business, which designs and manufactures combined heat and power (CHP) systems, building energy management systems  and biogas generators – for anaerobic digestion and landfill gas generation.

Duffill continued: “We recently launched our E-MAGINE building energy management system, which reduces energy consumption in buildings by up to 30% and are quickly building sales by free-issuing the equipment . We’re really ‘putting our money where our mouth is’ as we  meet all the equipment, installation and commissioning costs and then guarantee the savings. On this basis, if we fail to deliver on the proposed savings we make up the shortfall.  Needless to say, it’s a risk free business transaction that customers like.  It’s of particular benefit to fellow manufacturers who can gain better control of energy consumption across warehouses, production facilities and offices.”

ENER-G pioneered its pay-as-you-save Discount Energy Purchase scheme on its cost and carbon saving CHP systems in the 1990s and since the recent economic downturn more than 50% of its CHP equipment is purchased using this cash saving financial model.

With no capital outlay for equipment or installation, customers can benefit from an immediate reduction in their energy costs and carbon footprint. The CHP system is then paid for via a metered energy charge that is guaranteed to be lower than previous electricity purchase costs. The plentiful supply of heating is supplied free.

Sales Director Ian Hopkins said: “The Discount Energy Purchase concept is very simple and places virtually no risk on our clients. We select and install a CHP system that converts primary fuel into electricity and heat/cooling. Because the system is more efficient, we are able to charge less for electrical output than energy supply companies, provide free heating and cooling and still recoup adequate funds to cover the investment cost and ongoing maintenance of the system. Our clients can use their capital to fund core projects and sit back and enjoy bottom line savings.”

Hopkins added: “we have clients that have enjoyed the benefits of Discount Energy Purchase for 15 years and are now replacing their equipment under the same simple contract structure. DEP is a very effective way for companies to regain some control over their energy costs while electricity rates continue to rise. It also gives them independence from the National Grid, so that if there is
power failure they can keep the lights on and maintain business continuity.”

 ENER-G operates in 17 countries and recently announced that it had taken a  75% holding in US based CHP business Rudox  to accelerate expansion in the growing American combined heat and power market.

Further information: www.energ.co.uk

CHP – the wise energy choice for smart buildings

For buildings with high heating or cooling demand, it is difficult to match the cost effectiveness and carbon reduction benefits of combined heat and power (CHP) technology.

CHP or cogeneration is a reliable and proven ‘work horse’ – providing the simultaneous generation of electricity and heat/cooling. It is typically 85% efficient  and is around twice as efficient as conventional power generation where the generated heat is wasted and further losses of approximately 7% occur in transporting the electricity from remote power stations to customers.

CHP can achieve cost saving of up to 40% over electricity sourced from the grid and heat generated by on-site boilers.  As a carbon-cutting technology with a formidable track record, CHP is a cost effective tool for improving cost and environmental performance, while improving long-term energy security.

Systems powered by natural gas or other fossil fuels will  reduce carbon emissions by approximately 20%, while the carbon reduction benefits are even better for those systems primed by biofuels or biogas.

Cogeneration also provides the energy security businesses are seeking since it will ensure companies can continue to operate processes and keep the lights on in the event of power failure. It is a dependable source of emergency power – perfect for critical situations such as data centres, hospitals and manufacturing operations.

Payback can vary depending on the size and the scale of the project, as well as the rates that the business is paying for gas and electricity, but typical payback is between 3 and 5 years.

The fusion of CHP with other technologies can work effectively. Biomass boilers combined with gas CHP are a key example..

Where there is sufficient load at the site and at the appropriate temperatures to support the installation of a CHP system and ground source heat pumps, then there is the possibility of delivering an ultra-low carbon solution through the application of the combination of these two innovative technologies.  Although ground source heat pumps can deliver extremely high coefficients of performance, grid supplied electricity is required to power the refrigeration compressor. 

With the presence of a CHP system at the same site, the electricity generated by the CHP unit can be utilised to power the heat pump.  The CHP system is effectively decarbonising the operation of the heat pump and, in so doing, improving the carbon reduction credentials of an already renewable solution.

Efficient lighting schemes, especially refurbishments and retrofits are an effective combination with CHP. These can provide further cost, carbon and energy savings. It is ideal to work out the benefits of a new lighting scheme before sizing a CHP system as this can affect the level of demand, so linking these technologies has multiple benefits.

Additionally, adding a Building Energy Management System (BEMS) to a project can provide additional savings and allow you to control all your technologies, including a CHP from one place. This can allow you to optimise your energy usage and provide further savings. 

ENER-G’s CHP systems are installed in hospitals, museums, horticulture, hotels, district heating schemes, leisure centres, supermarkets, factories, and even in the Royal Palaces of Buckingham Palace and Windsor Castle.

ENER-G are Europe’s leading provider of packaged CHP systems from 4kWe to over 5MWe in size. The company project manages and finances integrated energy solutions – combining CHP with solar, lighting, building controls and other energy saving technologies and services to provide cost and carbon reductions for businesses.

Further information: www.energ.co.uk/chp